ROGONPDK Concrete Break Punch Drill 2 Stroke Petrol Hammer Drilling Machine, Petral Breaker 32.7CC/1200W Concrete Break Petrol Chisel Concrete Drill

Description

Package Included1x Hammer Drilling Machine3x Drills1x Point Chisel1x Flat Chisel1x Fuel Tank1x FunnelOther Accessories for AssemblySpecificationColor: BlackMaterial: Aluminum, PlasticStyle: ModernSurface Treatment: Painted ProcessAssembly Required: YesPower: 1200WDisplacement: 32.7CCEngine Type: Single Cylinder, Air Cooling, 2-strokeImpact Frequency: 3200min-1Impact Energy: 30JMax Torque and Speed: 1.5N.m/5000rpmFuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)Fuel Tank Capacity: 0.9L/0.2gal/30OzFuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per HourMax Drilling Diameter: 40mm/1.5inchStarter System: Hand Pull StartNoise: ≤104dBNet Weight (Exclude Drill): About 10.5kg/23lbsProduct Size (LxH): 63x24cm/24x9inchEngine Size: 36x32mm/14x12inchDrill Size: 22x350mm/0.8x13inchPoint Chisel Size: 18x350mm/0.7*13inchFlat Chisel Size: 16x280mm/6x11inchAuxiliary Handle Length: 13cm/5inchInstallation1.Press down the collet.2.Put in a drill bit or chisel.3.Release your hand.4.The installation is complete. DetailsHeat Dissipation Holes: The heat dissipation holes on the sides can dissipate heat in time and prolong the service life of this product.Fuel Tank: The large fuel tank (0.9L) can avoid frequent adding. Meanwhile, the semi-translucent design is convenient for you to observe the remaining fuel quantity and add fuel in time.Muffler: The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.ApplicationsHammer Function (Drilling While Hammering)Scope of ApplicationThis applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters.Pick Function (Hammer Without Drilling)Scope of Application:It is suitable for crushing, chiseling, digging, grooving, cutting, and other operations on concrete, masonry structure, and asphalt pavement.Notes1.Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder. 2.Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally. 3.Please add lubricating oil regularly to ensure strong power.4.Please do not touch the muffler exhaust hole to avoid scalding.5.The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.